Quartet

How can I download Maestro on my iPad/iPhone?

There is two ways to find and download Maestro on your iPad/iPhone:

A) Open the App Store and on the search bar type in “Apogee Maestro”. The app will come up and you can download it from there.

B) This second method requires that you connect your Apogee Interface compatible with iOS (ONE, Duet or Quartet) to your iPad/iPhone:

1) Go to Settings>General>About.

2) At the bottom of the list shown, select your interface name.

3) Go to “Find App for Accessory”, this will take you to the App Store where you will be able to download Maestro.

 

Apogee Maestro crashes when I launch it

If Apogee Maestro 2 is crashing every time you try to launch it, follow the steps below:

 

 

– Quit Apogee Maestro.

– Go to your Applications folder and locate the ‘Apogee Maestro 2’ icon.

– Click once on the icon and then hold down the Command key and press ‘i’ for ‘Get Info’.

– In the ‘Get Info’ window, check the ‘Open in 32-bit mode’ checkbox.

– Close the Get Info window and relaunch Apogee Maestro.

Not getting sound/no input or output from Quartet

Please go through these steps to ensure that everything is set up properly:

 

 

Setting up Quartet’s inputs:

 

 

Mics

 

Connect your Mic using only an XLR cable (no 1/4″ adapters or cables) to the XLR input jacks 1, 2, 3, or 4 on the rear of Quartet.

Launch ‘Apogee Maestro’ from your Applications folder, go to the ‘Input’ tab and set the ‘Analog Level’ drop-down menu for whichever input you’re using to ‘Mic’.

If you’re using a condenser mic that requires phantom power, engage the ’48’ button on the input you’re using.

Gradually bring the input level in Maestro up until you get a good level from your input source. Make sure the meter isn’t going into the red.

 

 

Guitars, Basses, Keyboards, Hi-Z Mics that have 1/4″ cables, such as harmonica mics:

 

Connect your Instrument using only a 1/4″ instrument cable to the 1/4″  input jacks for input 1, 2, 3, or 4 on the rear of Quartet (the 1/4″ jacks on the XLR combo jacks).

Launch ‘Apogee Maestro’ from your Applications folder, go to the ‘Input’ tab and ‘Analog Level’ drop-down menu for whichever input you’re using to ‘Instrument’.

Gradually bring the input level in Maestro up until you get a good level from your input source. Make sure the meter isn’t going into the red.

 

 

Sending Line-Level audio to Quartet and bypassing Quartett’s mic-pres

 

Connect the output from your line-level piece of gear (such as a compressor or external mic-pre) to the XLR input jacks 1, 2, 3, or 4 on the rear of Quartet. If your device only has 1/4″ outputs, you will need to use balanced 1/4″ to male XLR cables. You can’t use the 1/4″ input jacks on Quartet, as they are only used for guitars/basses/keyboards.

Launch ‘Apogee Maestro’ from your Applications folder, go to the ‘Input’ tab and ‘Analog Level’ drop-down menu for whichever input you’re using to ‘+4dBu’ (for use with professional audio gear) or ‘-10dBv’ (for use with consumer audio gear).

 

 

Setting up Quartet’s outputs:

 

 

Using Quartet with DAW or audio playback software:

 

– Launch ‘Apogee Maestro’ from your Applications folder, go to the ‘Output Routing’ tab click ‘Reset Routing’.

– Confirm that the mute or dim buttons aren’t engaged in Maestro’s output tab.

 

 

Using Quartet without any software- input directly to output:

 

– Launch ‘Apogee Maestro’ from your Applications folder, go to the ‘Output Routing’ tab and route the Hardware Outputs Line 1/2 and the Headphone outputs so that they are both set to ‘Mixer’ in the routing grid. Click on the routing grid markers to move them so that Line 1/2 and Headphones are routed to ‘Mixer’.

– Confirm that the mute or dim buttons aren’t engaged in Maestro’s output tab.

¿Qué sucede cuando recibo una llamada mientras estoy grabando con mi interfase Apogee?

Monitoreo y grabación se interrumpen en GarageBand de Apple y otras aplicaciones de audio de ONE, Duet, Quartet, JAM o MIC cuando se recibe una llamada. Una vez que la llamada ha terminado la grabación se reanuda.

A menos que las llamadas son más importantes que la creatividad! Se recomienda que en los iPhone> Ajustes No molestar (Do not Disturb) sea activado. Esto evitará que una llamada interrumpa la toma perfecta.

iPhone Settings

Mis medidores de nivel Apogee llegan a “Over” cuando escucho musica en iTunes

Se ha documentado que si el control de volumen integrado en iTunes esta al maximo, la señal enviada causa a los medidores de nivel de salida de la interfaz Apogee a que llegue a Overs.

La única manera de corregir esto es bajar el control deslizante de volumen de iTunes hasta que esto no suceda. Como regla general, intente establecerlo en torno al 90% del nivel máximo.